MIK-RD906 26GHz Tank radar level meter

Short Description:

MIK-RD906 26GHz Tank radar level meter with high frequency, measurement of solid and low dielectric constant of the best choice. Features


Product Detail

Product Tags

  • Specification
 Products Radar level meter sensor
 Model no. SUP-RD906
 Range 0-20 meters
 Application Tank
 Process Connection Thread or Flange
 Temperature -40℃~150℃
 Process Pressure Normal pressure
 Accuracy ±3mm
 Protection Grade IP67
 Frequency Range 26GHz
Output 4-20mA (Two-wire/Four-wire)
RS485 Modbus
 Power DC(6~24V)/ Four-wire
DC 24V / Two-wire
  • Introduction

 

  • Product Size

 

  • Installation guide
Be installed in the diameter of the 1/4 or 1/6.   Note: The minimum distance from the tank wall should be 200mm.Note:  ① datum ②The container center or axis of symmetry The top conical tank level, can be installed at the top of the tank is intermediate, can guarantee the measurement to the conical bottom   A feed antenna to the vertical alignment surface.   If the surface is rough, stack angle must be used  to adjust the angle of cardan flange of the antenna  to the alignment surface.   (Due to the solid surface tilt will cause the echo attenuation, even Loss of signal.)

  • Previous:
  • Next:

  • Write your message here and send it to us